This website is reader-supported. When you buy through links on our site, we may earn a small affiliate commission.

Best Bow Stabilizer

Last Updated: 16.06.24

Bow stabilizers – Buying guide, Reviews, and Comparison


If you just don’t have the time to read our carefully researched buying guide and product descriptions below, this short paragraph should have enough information to help you bag the best bow stabilizer for the money. After doing plenty of product evaluation by consulting expert review sites on hunting gear and comparing the ratings and reviews there with what is in actual owner feedback, we have been able to find what many customers consider the number one choice, the Trophy Ridge Static, which enables you to hold your bow in a stable manner throughout the entire shooting process. This bow stabilizer for sale allows the air to pass through it, which is critical during nasty, windy days in the tree stand. When you have to play the wind, it is vital that the bow is stabilized so you can focus on the shot and this implement makes that possible. It comes with two customizable weights coupled with a ballistic copolymer system to help reduce the weight and allow the air holes. In the event the Trophy Ridge Static runs out of stock because of its huge popularity among consumers, you could go for the second best option, the NAP Apache.



Comparison table


The Good
The Bad



5 Best Bow Stabilizers (Reviews) in 2024


We don’t claim to be expert hunters but we have had a number of miles in hunting behind us, which should be sufficient to enable us to describe what are considered top-notch bow stabilizers in the next paragraphs below.


1. Trophy Ridge Static Stabilizer


The Trophy Ridge Static is a smart and innovative bow accessory that helps make every hunting adventure less stressful and ultimately more successful. Helping you hold your bow to be more stable, this tool assists you in balancing your weapon throughout the entire shooting process while preventing the early onset of hand and arm fatigue when you have to hold the hunting bow for extended periods of time.

Uniquely designed with sensible air holes, this bow stabilizer allows the air to pass through those components, which is essential when spending nasty, windy days out in the tree stand. It can be stressful to have to play the wind during your bow hunting so keeping the weapon stable is important if you are to concentrate on the shot.

This tool comes with two customizable weights to support your release technique. Aside from that, it also comes with a ballistic copolymer system that helps reduce the weight you have to carry in your hands while enabling the air holes to do their job. Made of lightweight materials, this device takes wind out of the equation so you can focus on your shooting style.

This 9-inch long bow and arrow stabilizer provides balance and reduces weight while being easy to carry via its braided wrist sling.


Enabling you to keep your bow stable throughout the entire shooting process, this device is innovatively constructed with air holes that allow the air to pass through them, keeping the bow balanced.

The two included customizable weights support your release style, making the device the ideal bow stabilizer setup for your favorite hunting bow.

The tool is also equipped with a ballistic copolymer system that helps lessen the weight and allows the air holes to function as they should so you can play the wind and still concentrate on every shot.

This bow stabilizer features an ergonomic design that is ultra-lightweight, which provides a good balance to prevent hand fatigue especially during extended hours of hunting.

The braided wrist sling makes the bow stabilizer easy and convenient to carry because it is attached to the wrist, which enables a quick and easy deployment when needed.


It is recommended that the compatibility of this bow stabilizer be checked with your hunting weapon to ensure it is a suitable choice for your needs.

Buy from





2. NAP 8 Inch Apache Stabilizer


The NAP Apache is a smart and superbly functional hunting bow accessory constructed with high-quality materials and a revolutionary design to keep your bow balanced and easy to handle even when the going gets tough out in the hunting field. It is engineered to bring down the noise and vibration so you can make the shot easily without spooking the target away.

Minimizing the vibration to ensure a silent shooting rig is critical especially when you have to hunt in unfriendly, windy conditions and this stabilizer does the job of keeping a balanced shooting bow while bringing the noise down to a minimum. It is a complete bow stabilizer kit as it comes with proprietary dampening materials to deliver a balanced and noise-free weapon.

This 8-inch bow stabilizer is outfitted with a removable 3-inch long, 2-ounce carbon-fiber accessory bar that enables you to keep the weight of the tool as far away from the bow as possible to guarantee a good balance. It adheres to the same solid construction and stealth qualities that have made the Apache drop-away arrow rest lineup popular among consumers.

Customers can also choose between the black model or the one in Realtree APG Camo. Lightweight at just 7.5 ounces, this bow stabilizer is easy to handle and provides a dependable performance.


This is a good bow stabilizer that is equipped with proprietary dampening materials to reduce or completely eliminate vibration by silencing the bow when you shoot.

By reducing noise and vibration, this device will not spook the target so you can maintain that critical element of stealth during your hunting activity.

This 8-inch device comes with a removable 3-inch long, 2-ounce carbon fiber accessory bar that keeps the weight of the stabilizer to the far side of the bow, which delivers a great balance.

This implement comes with the same strong build and stealth characteristics that have made the line of Apache drop-away arrow rests a success on the market.

Lightweight at just 7.5 ounces, this hunting bow accessory helps balance out your hunting bow so your bow arm and hand will not feel fatigue or pain too quickly during long days in the wilderness.


While this bow stabilizer is a bit heavy on its front end, it is geared to be positioned on the far end of your weapon to provide a balanced setup.

Buy from





3. SAS Archery Aluminum Bow Stabilizer


The SAS Archery Aluminum is a revolutionary and innovative piece of hunting bow accessory that will help make any hunting adventure more

enjoyable and less stressful. It is smartly designed to support any hunter’s objective of making a noiseless, vibration-free shot so they can focus more on their accuracy and technique instead of worrying about how to prevent noise when releasing the arrow.

This bow stabilizer helps you keep your bow steady thanks to the exclusive Vibration Dampening Technology that ensures reduced noise due to the tension of the string that springs back into position after a shot is made.

It serves as a full-draw Counterbalance system to enable you to focus on the shot and release the arrow without worrying that when the string slaps back, there’s going to be more than just a blunt thump to tell you the projectile is cast into the air to fly to the target.

This bow accessory is CNC and precision-machined from 6061-T6 Aluminum so you are sure it won’t add extra weight to your shooting rig but will ease up on the noise instead so as not to spook the animal you are pursuing. This model is available in either the Autumn Camo or Black variety, and in different weights and lengths to suit your preference.


Able to reduce the vibration when you shoot, this hunting bow accessory dissipates the noise from your shot as well, helping you catch the target unaware while steadying every shot too.

This hunting tool is CNC-machined from 6061-T6 aluminum for a precise build. Making the most of its ergonomic design, the device cuts the noise and vibration down while also leveraging its lightweight build.

he Vibration Dampening Technology ensures that the noise generated through the vibration of the string on the bow is reduced sufficiently so as not to spook the target away.

The bow stabilizer also helps with the counterbalance at full draw so you can align your shots evenly to guarantee the projectile flies fast and true to the intended spot to prevent misses.

This product is available in either Black or Autumn Camo, along with different sizes and weights to suit every hunter and their shooting style.


Some users believe they should have gotten a larger size after trying out the short-sized ones on the field.

Buy from





4. Octane 5 inch Ultralite Bow Stabilizer


The Octane 5 inch Ultralite absorbs the vibration of the string when you release the projectile, which results in a more stable bow after the projectile flies through the air so you can confidently thrust the arrow forward to the target. This is a lightweight device that doesn’t weigh down the bow in any significant way to make it heavier and bulkier.

This bow stabilizer snuffs out the noise and vibration so when you release the projectile, there’ll just be a gentle thump of the string against the limb of the bow instead of a loud crack that can alert the animal to your presence. The tool comes with a balanced design that ensures a problem-free attachment to your bow so you won’t have to worry that one section will be significantly heavier than the other.

The Black rubber over-mold on the device is quiet to touch and it also protects against weathering conditions so your bow stays in one piece for many hunting seasons. This 6.4-ounce, 5-inch bow stabilizer is lighter than most popular products on the market while being as effective in eliminating the vibration and noise with every shot.

The durable yet superbly lightweight design provides a good balance while promoting a proper follow-through. The tool fits securely to reduce the effects of the torque for precise shooting.


This bow stabilizer is engineered with a lightweight design so it will not add bulk to your shooting rig nor will it put additional weight on the bow that can hamper your shooting precision.

It comes with a balanced design that allows its placement on the hunting bow without making one side heavier than the other.

The construction of the device enables it to eliminate noise and vibration so you won’t have to worry about spooking the target and you can focus on making the shot as accurate as possible instead.

This device is constructed out of rubber so it certainly won’t add weight to your weapon especially considering the 6.4-ounce weight and the rubber over-mold that is quiet to the touch.

This is a durable accessory that supports the need for a proper follow-through along with the needed protection against weathering conditions.


One user believes this model is quite useful for target practice as it mostly absorbs the vibration from the string instead of simply stabilizing the weapon.

Buy from





5. LimbSaver HD S-Coil Bow Stabilizer


The LimbSaver HD S-Coil 4512 is equipped with a redesigned sectional geometry that blocks off and dampens vibration at increased levels while reducing the torque from the bow so you can enjoy a smoother feel as well as a quieter shooting experience with a reduced jumping of the weapon when you make a shot.

This HD S-coil is remarkably balanced and is just 4.5 inches long so it should not block your sight nor will it make the bow heavier than it is. The device is equipped with the exclusive noise and vibration control material (NAVCOM) from LimbSaver, which radically increases the surface area of the energy-absorbing material to create nodes that work to cancel the shock independently, which reduces the recoil and noise to a high level.

This lightweight and short noise dampener provides quick and hassle-free installation. It is solidly constructed to support an outdoor functionality even in demanding conditions. The device is engineered with cutting-edge technologies for a highly-efficient vibration and noise-dampening capability just like the other products in the brand’s archery and firearm lineup.

Proudly designed and crafted in the USA, this product is popular among military, law enforcement, outdoor enthusiasts and practitioners, and many others.


This revolutionary bow accessory boasts a redesigned sectional geometry that dampens and distributes vibration at a higher level to reduce the bow torque.

The decrease in the bow torque results in a reduced bow jump for a smoother feel plus a quieter shooting experience.

This is a remarkably balanced hunting accessory made with the exclusive NAVCOM technology from LimbSaver, which stands for noise and vibration control material, to deliver a superb dampening capacity perfect for hunting.

This bow stabilizer carries a design that dramatically increases the surface area of the energy-absorbing material to create nodes that cancel shock independently, which reduces the recoil and noise despite its short and lightweight construction.

Quick and easy to install, this bow stabilizer comes with a durable build to enable its use in the most demanding settings thanks to being engineered and crafted by hand in the USA.


The device has a strong chemical, rubbery smell on it owing to its solid construction, but that should go away with continued outdoor use.

Buy from





Buying guide


With stealth being of primary importance in bowhunting, a stabilizer has easily risen as one of the most critical components of your hunting rig to ensure success during every outing. The animal being hunted has sharp senses after all and the more you focus on keeping noise and vibration to a minimum, the greater your chances of being able to creep up to the target without being detected. Just what do the top-rated products in the bow stabilizer reviews have that the less stellar ones lack?

The best bow stabilizer can be any one of several types

Depending on the design of your bow, you can find a variety of stabilizer types to suit your purpose. There is a variety of weights and lengths available, so you might have to do some experimenting in order to find the perfect one. While all bow stabilizers dampen the vibration and noise, there will be a variation in the effect on balance from one unit to another.

A long rod stabilizer can have a length anywhere from 36 inches and beyond. This type transfers the center of gravity to the front so as to reduce the bow jerkiness during the release of the projectile, which, in turn, improves the shooting accuracy. This type of unit is typically mounted below the hand grip and extends forward of the bow directly.

Long rod stabilizers are better suited for use in target shooting than hunting because of their significant forward extension, which also means you will have to experiment with a variety of lengths to find the perfect balance to fit your bow.

A twin stabilizer answers the need for ultimate stability. This type is affixed with one section directly above the hand grip while the other part lies below it. A twin stabilizer reduces the up-and-down hand errors and additionally decreases the torque as well. It will also lessen the tendency of the bow hand to twist during the release. Shorter than a long rod type, this device is ideal for hunting purposes.

A reverse stabilizer is a combination of the first two kinds while being generally used in combination with a long-rod stabilizer. The center of gravity can still be at the extended hand, but many bow users believe there is greater accuracy and stability when a definite pivoting point is created. You can opt to use either one or two reverse stabilizers.

Some costlier products feature extensions to provide weight customization. Weight can vary in other models, but the length and width are the same. Stabilizers can come in a solid color or a camouflage pattern, which is suitable for hunters.


The best hunting bow stabilizer boasts a dependable construction

Most bow stabilizers feature a body comprising a solid piece of tube-shaped material. Many stabilizer bodies of past units were constructed of metal, which tends to be heavy. Although this tool can add some weight, it should not be significant and should be in the proper spot on the bow.

The makers of bow stabilizers dampen the vibration by using rubber in their products. Other utilize a gel compound. Some light materials used by manufacturers include ABS plastic, carbon, and similar materials that ensure a rigid yet lightweight build. For extra durability, some stabilizer makers use graphite.

Lightweight and extremely durable, carbon is ideal for stabilizers. The material provides the perfect platform due to its thinness, rigidity, and lightweight composition while promising minimal wind resistance, which is critical with the increase in the stabilizer length and ensures you get the best bow stabilizer for accuracy.


The best compound bow stabilizer offers superior vibration and noise dampening capability

The dampening device of your stabilizer is a critical component. Most manufacturers utilize a type of sand, gel, or rubber that serves as the dampening element. While all those materials do provide a dampening ability, a lot of sports gear makers that are not in the hunting sector use rubber to eliminate or isolate shock, noise, and vibration.

Despite the many technological advancements in tennis racquets and baseball bats, for instance, even the makers of high-scale products still incorporate rubber in their offerings because vibration remains a component to get rid of no matter how advanced the technology is.

The dampening effect has to be enforced at the most effective and beneficial spot and properly transferred from the bow and out through the end of the stabilizer. The dampening component needs to be away from the bow end of the unit and directed toward the farthest section from the bow and after the body of the stabilizer to leverage the efficiency.

The best stabilizer for recurve bow or any other type of bow should have a weighted front end

Plenty of the bow stabilizers on the market today are outfitted with a weighted front end. To make the most of the stabilizer effectiveness, that weight should be located after the rubber material at the end of the stabilizer. This is the point farthest from the bow. That is not merely an accidental thing, as the weight functions as a counterbalance to keep the bow stable during the projectile release.

This is the design that can be found on high-end target rifles in which the stock of the gun is typically lightweight while the barrel is quite heavy. This will help increase the aiming, accuracy, and effectiveness of the weapon.



Leave a comment